RC4WD 1/14 Scale R350 Compact Track Loader RTR VVJD00052

€ 2.999,00

RC4WD 1/14 Scale R350 Compact Track Loader RTR

  • Manufacturer: RC4WD
  • Manufacturer No.: VVJD00052


English description:1/14 Scale R350 Compact Track Loader RTR

Important Note:Due to the size and weight of this product, this product has to be shipped in its own container. It will be shipped only by Expedited Shipping Service (5-8 days), this requires an extra shipping surcharge of $170 to ship anywhere in the US and all international countries due to the size and weight.

CNC Machined Metal Parts
Molded Steel Bucket
6 Channel 2.4Ghz Radio
Optimized Steel Hydraulic System
Scale Operator Station (can fit a driving figure)
Crawler Travel System
Heavy Duty Hoses
Powder-coated in White, Gray and Red
Brushless System (Hydraulic)
Scale Interior
Transmission ratio: 1:109
Battery Size:90 x 45 x 20mm / 3.54 x 1.77 x 0.78in
Bucket Capacity: 155 x 65 x 42mm / 6.10 x 2.55 x1.65in
Maximum Bucket Force: 1.5kg / 6.83lbs
Scale: 1 : 14
Length: 284mm / 11.1in
Width: 156mm / 6.14in
Height: 157mm / 6.18in
Maximum Bucket Height: 235mm / 9.25in
Maximum Bucket up and down Angle: 11 to 103 degrees
Weight: 3.1kg / 6.8lbs
Operating Oil Pressure: 3Mpa
Manufactured by JDCustoms
30 Days Limited Warranty

What's Include:
1x 1/14 Scale R350 Compact Track Loader RTR

Required Parts:
2S Lipo Battery
4x AA Batteries for Radio (Z-S1718)
Gens ace 5000mAh 7.4V 50C 2S1P Short-Size Lipo Battery Pack with T Style Plug

Optional Parts:
1/14 Grapple for R350 Compact Track Loader (VVV-S0242)
1/14 Pallet Forks for R350 Compact Track Loader (VVV-S0247)

While some components may come assembled, it may be in your best interests to check the products to ensure all hardware is tight. In some cases you may want to apply threadlock to some of the hardware that is already installed.
ESC Supports bullet Connector
Use good quality hex drivers to avoid stripping screw heads.
Use thread lock when putting metal screws into metal parts.
Steps marked with an asterisk (*) require thread lock.
Use thread lock sparingly.
Do not over tighten screws otherwise you may strip the thread.