RC4WD 1/14 8x8 Forge Hydraulic Dump Truck RC4VVJD00058
RC4WD 1/14 8x8 Forge Hydraulic Dump Truck
- Hersteller: RC4WD
- HerstellerNr.: VVJD00058
Englische Beschreibung:1/14 8x8 Forge Hydraulic Dump Truck
The Forge is one of the most powerful R/C Hydraulic Dump Trucks available today. It is highly detailed and based on the European style dump trucks. It is engineered specifically for the tough demands of transporting gravel, sand, asphalt, snow, wood chips or rocks. Created for the customer who requires reliability and high production in bulk earth moving or construction projects. It's made with CNC machined metal parts, fully assembled, ready to work! Be ready for the massive power through the 930KV high speed output brushless hydraulic system.
Payment Information: Due to the value of this product, the only forms of payment that will be accepted are Affirm and Bank Transfer. Please do not choose credit card or Pay Pal or Credit Card when checking out as we will cancel the order. Feel free to email us at firstname.lastname@example.org if you have any questions.
Important Note: Due to the size and weight of this product, this product has to be shipped in its own container. It will be shipped only by Expedited Shipping Service (5-8 days), this requires an extra shipping surcharge of $300 to ship anywhere in the US and all international countries due to the size and weight.
Hard Plastic European Style Front Cab
Full Metal 3 Speed Transmission (Planetary Gears)
Transfer Case (Billet Aluminum)
Super Scale Leaf Spring Suspension Setup
Scale Rims (Stainless Steel / Billet Aluminum)
Remote Lockable Front and Rear Axle (Locking Differential)
Full Metal Front and Rear Axle Housing
Steel Scale Drive Shaft
Realistic Front Cab Latch
Spare Tire Included
Molded Functional Fuel Tank
Automatic Trailer Gate (Do Not Attempt to Open by Hand)
Rear Light Guard (Protects Against Rocks)
Scale Light Buckets (Fits 3-5mm LED)
Recommended Payload: 15kg / 33lbs
Maximum Lift Power: 42kg / 92lbs
Cylinder Maximum Thrust: 109kg / 231lbs
Brushed Driven Motor
930KV Brushless Motor-Driven Micro Hydraulic Pump
Length: 690mm / 27.1in
Width: 190mm / 7.4in
Height: 270mm / 10.6in
Weight: 9.8kg / 21.6lbs
Axle Gear Ratio: 9:1
Theoretical Load: 15kg / 33 lbs
First Gear 1/113, Second Gear 1/86.4, Third Gear 1/62.1 (Transmission)
Basic 10 Channel 2.4Ghz Radio
This Product Is Professionally Pre-assembled
Manufactured by JDCustoms 30 Days Limited Warranty
1x 1/14 8x8 Forge Hydraulic Dump Truck
Earth Digger 4200XL Excavator Brushed ESC (VVV-S0011)
Hydraulic Connector M5 x 4mm Tube (90deg) (VVV-S0069)
4x AA Batteries for Radio (Z-S1718)
Twister Extreme Hi-Voltage Coreless Metal Gear Digital Waterproof Servo (Z-E0125)
Twister High Torque Metal Gear Digital Servo (Z-E0035)
Hauler Super Wide 1.7" Commercial 1/14 Semi Truck Tires (Z-T0071)
Long Haul 1.7" Commercial 1/14 Semi Truck Tires (Z-T0026)
LoRider 1.7" Commercial 1/14 Semi Truck Tires (Z-T0066)
Roady 1.7" Commercial 1/14 Semi Truck Tires (Z-T0032)
Roady Super Wide 1.7" Commercial 1/14 Semi Truck Tires (Z-T0072)
When you raise the rear dump, do not leave it at the highest position. It will create a lot of pressure and potentially blow up the oil tube. Stay no more than 2 seconds and drop the dump to a lower position.
Do not use hand to pull the rear door. You will break the door locking mechanism.
Do not use more than 3S battery. (11.1 volt(s))
Once the hydraulic cylinder (dump) reaches its maximum height, do not push further.
Must turn on the transmitter before starting the ESC.
ESC Supports XT60 Connector
The ESC does not have lipo cut off.
While some components may come assembled, it may be in your best interests to check the products to ensure all hardwares are tight. In some cases you may want to apply threadlock to some of the hardwares that were already installed.
Use good quality hex drivers to avoid stripping screw heads.
Use thread lock when putting metal screws into metal parts.
Steps marked with an asterisk (*) require threadlock.
Use threadlock sparingly.
Do not over tighten screws, otherwise, you may strip the thread.
This product is for experienced R/C users. Not recommended if you just started with R/C.
The axle hubs can be screwed off but may require nylon tipped pliers if they are on really tight.