RC4WD 1/14 8X8 Roll Off Hydraulic Dump RTR Truck RC4VVJD00064

€ 5.399,00

RC4WD 1/14 8X8 Roll Off Hydraulic Dump RTR Truck

  • Manufacturer: RC4WD
  • Manufacturer No.: VVJD00064

1/14 8X8 Roll Off Hydraulic Dump RTR Truck

Hard Plastic European Style Front Cab
Full Metal 3 Speed ​​Transmission (Planetary Gears)
Transfer Case (Billet Aluminum)
Super Scale Leaf Spring Suspension Setup
Scale Rims (Stainless Steel / Billet Aluminum)
Remote Lockable Front and Rear Axles (Locking Differential)
Full Metal Front and Rear Axle Housing
Steel Scale Drive Shaft
Realistic Front Cab Latch
Molded Functional Fuel Tank
Automatic Trailer Gate
Controlled LED Light Modules
Realistic Engine Sound Simulator
Detachable Rear Dump
Rear Light Guard (Protects Against Rocks)
Scale Light Buckets (Fits 3-5mm LED)
Recommended Payload: 10kg / 22lbs
Maximum Lift Power: 42kg / 92lbs
LiPo Cutoff
Fully Painted
Scale Wheel/Tire
Cylinder Maximum Thrust: 109kg / 231lbs
Brushed Driven Motor
930KV Brushless Motor-Driven Micro Hydraulic Pump
Length: 680mm / 26.7in
Width: 190mm / 7.48 in
Height: 270mm / 10.6in
Weight: 10kg / 22lbs
First Gear 1/113, Second Gear 1/86.4, Third Gear 1/62.1 (Transmission)
Basic 10 Channel 2.4Ghz Radio

Replacement Parts:
Earth Digger 4200XL Excavator Brushed ESC (VVV- S0011)

Required Parts:
5000mAh 11.1V 50C 3S1P LiPo Battery Pack with XT60 Plug (Battery size must be no bigger than 140mm in length, 45mm in width, and 25mm in height)
Compatible Battery Charger
4x AA Batteries for Radio (Z-S1718)
Chevron AW ISO 32 Hydraulic Oil 14oz (Z-X0042)

Optional Parts:
Twister Extreme Hi-Voltage Coreless Metal Gear Digital Waterproof Servo (Z-E0125)
Twister High Torque Metal Gear Digital Servo (Z-E0035)
Hauler Super Wide 1.7" Commercial 1/14 Semi Truck Tires (Z-T0071)
Long Haul 1.7" Commercial 1/14 Semi Truck Tires (Z-T0026)
LoRider 1.7" Commercial 1/14 Semi Truck Tires (Z-T0066)
Roady 1.7" Commercial 1/14 Semi Truck Tires (Z-T0032 )
Roady Super Wide 1.7" Commercial 1/14 Semi Truck Tires (Z-T0072)

When raising the dump bed, do not leave at upper-most position for more than 2 seconds, doing so may cause damage to the hydraulic system. Do not
push/pull the truck by the tailgate, doing so may cause damage to the locking mechanism.
Do not use more than 3S battery. (11.1 volt(s))
Do not try to operate lift past its fully-extended height, doing so may cause damage to hydraulic system.
Must turn on the transmitter before starting the ESC.
ESC Supports XT60 Connector
While some components may come assembled, we recommend checking the hardware and screws are all properly secure, especially after shipping. As an option, you may want to apply thread lock to some of the installed hardware.
Use good quality hex drivers to avoid stripping screw heads.
Use thread lock when putting metal screws into metal parts.
Steps marked with an asterisk (*) require threadlock.
Use threadlock sparingly.
Do not over tighten screws, or you may strip the thread.
This product is for experienced R/C users. Not recommended for beginners.
The axle hubs can be removed, but may require additional force.
This Product Is Professionally Pre-assembled
Manufactured by JDCustoms 30 Days Limited Warranty
This JDM Product ships in carton packaging with a padded shipping crate inside for added protection.
This shipping crate solely protects this JDM product through the shipping process. Any other case utilization is outside of its intended purpose.