JUNSI/ICHARGER ICHARGER DX12
DESCRIPTION
With the new iCharger DX12, the renowned manufacturer Junsi has brought a DUO charger in compact format onto the market.
The new DX12 charger combines the advantages of the well-known Junsi iCharger DUO series with the portability of a small pocket charger. Despite the small dimensions of 111.5 x 128.5 x 40 mm, no compromises have been made in terms of performance and usability. The newly developed rotary wheel has a very good pressure point and makes operation much easier.
The technical data is impressive, 1700W charging power (from >25V), 1-12s LiXx cells and up to 30A charging current are also enough for large batteries with high capacity. Of course, all other battery types can also be charged, such as LiHV, LiIo, NiZn, PB, NiCd or NiMh batteries.
The total discharge power is 80W (50W per output if only one output is used), but can be increased up to 3000W using an external load (discharge resistor). Of course, the iCharger DX12 also supports regenerative charging. Here, the battery capacity is fed back into the supply battery, for example from a full flight battery.
The balancer current of 4 amps total (2A per output) always ensures perfectly balanced cell voltages.
A USB-C PD port for charging smartphones etc (5V/3A, 9V/2A, 12V/1.5A) or for software updates is also installed. The Micro SD slot can be used to log data, but also for future updates.
A servo tester is also integrated, please note that an external power supply is necessary!
The menu navigation is almost identical to the well-known Junsi iCharger 308DUO, 406 DUO or 4010DUO.
A 2.8" IPS LCD display ensures good readability even in low light.
Instructions in English are included with the loader in the form of a CD; you can download the German version from us.
All Junsi chargers in the X and DUO series are developed and approved for use in model making. Industrial use is not intended and therefore not permitted! All Junsi chargers may only be operated on power supplies developed for model building! No AGM batteries may be charged in the PB program!
DANGER! In order to be able to charge for 12s, a 13-pin XH connector strip is required on the battery! There is NO balancer board included to be able to load 2x6s as 12, for example! (CB-12XH/EH)
The well-known CB-1010 can be used with the 11-11 wire for 10s as 2x 5s!
* Charging a 12S battery with 2 balancer plugs *
You need a circuit board with a connection cable that fits the battery and the charger. Then be sure to follow the following order:
- First connect the charger to the power supply or a supply battery. If you are using a power adapter, turn it on first.
Watch out! Only when the batteries are correctly connected to the balancer board then connect them to the charger!
- First plug the first balancer plug of cells 1 - 6 "battery negative side, black cable" into the appropriate 6S slot on the board from the negative side, -
then plug the second balancer plug of cells 6-12 into the second 6S slot from the plus side "Battery plus side, red cable". Now connect it to the charger. If there hasn't been any flashing or smoking by then, you've done everything right!
- Now connect the thick red main charging cable "+" of the battery to the charger, then the thick black main charging cable "-".
Connections: Avoid short circuits, otherwise there is a risk of injury! This sequence described also applies when charging several batteries in series!
You are responsible for any damage or defects that may result from non-compliance!
Scope of delivery: Only the device itself is delivered!
CHARACTERISTICS
Charging current adjustable per output: 0.05-30A
Charging current adjustable in synchronous mode: 0.05-50A
Max. number of NiCd/NiMH batteries: 1-32
Input voltage: 11-53VDC
Length (mm): 111.5
Max. number of LiHv cells: 12
Max. number of LiPo cells: 12
Max. charging power at one output: 1200W
Maximum power: 1700W
Charging power Max Syncron: 1800W
Balancer compensation current per output: 2A
Max. discharge power: 3000W
Discharge current adjustable for energy recovery: 30A
Max. charging current: 30A per channel, 50A in sync. mode
Max. voltage lead batteries: 40V
Balancer balancing current synchronous mode: 4A
Discharge power per output: 50W
Input current limit: 65A
Discharge power Max. in synchronous mode: 80W without external load
Micro SD card slot: Yes
Integrated power supply: No
Plug type charging output: XT60
Plug type input: XT90
Latest synchronous buck-boost technology for maximum performance in small dimensions
DUO charger with 2 equivalent charging outputs with max. 1200W each / total 1700W
USB-C port with PD (Power Delivery) for charging current smartphones etc. 5V/3A, 9V/2A, 12V/1.5A
Micro SD slot for data log // Integrated servo tester // Channel 1 can be used as a power supply 2V-50V, 1A-30A
Total 4A balancer current (2A per output) Very compact and light (LxWxH 111.5 x 128.5 x 40 weight 500g