RC4WD 1/10 BendPak XPR-9S Two-Post Auto Lift

Englische Beschreibung:RC4WD 1/10 BendPak XPR-9S Two-Post Auto Lift

This is the new Licensed 1/10 BendPak XPR-9S Two-Post Auto Lift. These have been Officially Licensed by the BendPak company and are only available from RC4WD and our Dealers. Complete with battery and fully functional allowing for that ultimate scale garage look.

Specifications:
Billet Aluminum Lift Towers, Lift Arms and Lift Base
Steel Lift Screws
Lifting Capacity: 22lbs/10kg 
The Overall Height: 16.50in / 420mm 
The Overall Width: 16.90in / 430mm
Column Width: 1.57in / 40mm
Arms Width: 0.63in / 16mm
Lift Height Max: 9.45in / 240mm
Time To Full Rise: 50 sec
JST-PH 2.0 Battery Plug Connector

What's Included:
1x RC4WD 1/10 BendPak XPR-9S Two-Post Auto Lift
1x Battery Pack
1x BendPak Decal Sheet
1x Warning Decal Sheet
1x Instruction Manual

Required Parts:
Charger needed with an appropriate plug to charge the included NIMH battery pack

Replacement Hardware:
Steel Flat Head Cap Screw M2 X 4mm (Z-S1516)
Steel Flat Head Socket Cap Screw M3 x 8mm (Z-S0649)
Steel Button Head Cap Screws M3 x 4mm (Z-S0745)
Steel Button Head Cap Screws M3 x 8mm (Z-S0652)
Steel Socket Head Cap Screws M2 x 10mm (Z-S0849)
Steel Socket Head Cap Screws M2 X 6mm (Z-S0611)
Steel Flat Head Cap Screws M3 x 10mm (Z-S0860)
Steel Socket Head Cap Screws M2.5 x 10mm (Z-S1290)
Steel Socket Head Cap Screws M2.5 x 6mm (Z-S0855)
M3 X 3mm Set screw (Z-S0124)
Notes:

Adjustable Arms to fit many different vehicles
BendPak is a registered trademark of the BendPak XPR-9S company. The BendPak logo is property of BendPak XPR-9S and used under license by RC4WD.